Here are some tutorials, in increasing order of complexity. We advise beginners to follow the tutorials in the order they're presented.

Important: Most (if not all) of these tutorials required a computer with our toolchain installed. Be sure to refer to the toolchain installation page if you haven't already done so.

• Tutorial 1: GNU Radio Benchmark example. This is the “hello world” of CorteXlab!
• Tutorial 2: Sharing the testbed with other users. How to allow other users to share the testbed with you (UNDER DEVELOPMENT)
• Tutorial 3: From A to Z: GNU Radio with CorteXlab using USRPs. Starting from a clean sheet to a running experiment in CorteXlab using USRPs.
• Tutorial 4: From A to Z: GNU Radio with CorteXlab using PicoSDRs. Starting from a clean sheet to a running experiment in CorteXlab using PicoSDRs.
• Tutorial 5: Custom bitstream with PicoSDR. Let's see how to use a custom bitstream on a PicoSDR.
• Tutorial 6: Spectrum analyzer example. Introduction of the feedback tool. (to be written, see FFT Web)
• Tutorial 7: Channel estimation example. Your first useful experiment with CorteXlab. A more complex usage of the feedback tool. (to be written)
• Tutorial 8: FPGA-based IEEE 802.15.4 PHY Layer Transmitter example using Custom Bitstream (PicoSDR)

A new method is also available, if you don't want to install the toolchain and you're familiar (or not) with docker

• Tutorial 1: GNU Radio Docker Benchmark example This is the “Hello world” of Cortexlab using docker (UNDER DEVELOPMENT)