Differences

This shows you the differences between two versions of the page.

--- isp-iot-challenge [2018/11/20 14:55] – [Stage 1: Local testing] ooubejja
+++ isp-iot-challenge [2018/11/22 14:17] (current) – [Stage 3: Raise the bar !] ooubejja
@@ Line 267: / Line 267: @@
   * etc
+Start experimenting and try to get some results as in the local tests.
+Maybe you'll have to strengthen the processing in the uplink transmission (modify some parameters, thresholds, etc)
-Start your experiment and evaluate the transmission quality.
+**UPDATE For Wednesday 21 :**
-Maybe you'll have to strengthen the processing in the uplink transmission !
+If you have some difficulties creating GRC flowgraphs, you can get an example for each node here:
+<code>
+yourlogin@srvairlock:~$ mkdir stage2
+yourlogin@srvairlock:~$ cp /cortexlab/homes/ooubejja/ws/cxlb stage2/
+yourlogin@srvairlock:~$ ls stage2/cxlb
+</code>
+In stage2/cxlb you should have these files now:
+<code>
+A.txt             ephyl_bs_core.py  ephyl_sensor.py           main_bs.grc      scenario.yaml
+B.txt             ephyl_bs.grc      ephyl_sn_sched.py         main_bs.py       tag2msg.py
+C.txt             ephyl_bs.py       example.txt               main_sensor.grc  tag2msg_sn.py
+data_slot_mux.py  ephyl_sensor.grc  file_source_slot_ctrl.py  main_sensor.py
+</code>
+Open ''main_bs.grc'' and ''main_sensor.grc'' in GNU Radio, some parameters are already set to match CorteXlab setting (UHD blocks, generation options, reference source,etc). However, you should verify RF parameters (Freq, gain, sample rate,etc).
+Also, don't forget to adapt ''scenario.yaml'' to your actual scenario.
@@ Line 283: / Line 305: @@
 The proposals can be relevant to :  PHY/MAC layers, data compression, channel coding, throughput, interference management, etc.
-Finally, keep in mind that, even after the Winster school, you can continue working on the framework (or anything else) anywhere and anytime, since you have your personal FIT/CorteXlab account.
+Finally, keep in mind that, even after the Winter school, you can continue working on the framework (or anything else) anywhere and any time, since you have your personal FIT/CorteXlab account.
 And, please, if you ever use the testbed in your research, don't forget to [[http://ieeexplore.ieee.org/abstract/document/6849176/|cite]] FIT/CorteXlab in your publications
+**THURSDAY 22 UPDATE :**
+pm-3.30pm ->  Add final touch and prepare a presentation (if any)
+.30pm-4.30pm -> Present your contribution
+.30pm-5pm -> Winners announcement