Differences

This shows you the differences between two versions of the page.

--- tutorials [2017/11/30 11:49] – ooubejja
+++ tutorials [2017/12/08 12:12] – lcardoso
@@ Line 5: / Line 5: @@
 **Important: Most (if not all) of these tutorials required a computer with our toolchain installed. Be sure to refer to the toolchain installation [[ Building a toolchain | page]] if you haven't already done so.**
-- [[ GNU Radio Benchmark example ]]. This is the "hello world" of CorteXlab!
+- Tutorial 1: [[ GNU Radio Benchmark example ]]. This is the "hello world" of CorteXlab!
-- [[from_gnuradio_to_cortxlab|From A to Z: GNU Radio with CorteXlab using USRPs]]. Starting from a clean sheet to a running experiment in CorteXlab using USRPs.
+- Tutorial 2: [[ Sharing the testbed with other users ]]. How to allow other users to share the testbed with you (UNDER DEVELOPMENT)
-- [[from_gnuradio_to_cortxlab_pico|From A to Z: GNU Radio with CorteXlab using PicoSDRs]]. Starting from a clean sheet to a running experiment in CorteXlab using PicoSDRs.
+- Tutorial 3: [[from_gnuradio_to_cortxlab|From A to Z: GNU Radio with CorteXlab using USRPs]]. Starting from a clean sheet to a running experiment in CorteXlab using USRPs.
-- [[tuto_fpga_pico|Custom bitstream with PicoSDR]]. Let's see how to use a custom bitstream on a PicoSDR.
+- Tutorial 4: [[from_gnuradio_to_cortxlab_pico|From A to Z: GNU Radio with CorteXlab using PicoSDRs]]. Starting from a clean sheet to a running experiment in CorteXlab using PicoSDRs.
-- [[Spectrum analyser example|Spectrum analyzer example]]. Introduction of the feedback tool. (to be written, see [FFT Web](fftweb))
+- Tutorial 5: [[tuto_fpga_pico|Custom bitstream with PicoSDR]]. Let's see how to use a custom bitstream on a PicoSDR.
-- [[ Channel estimation example ]]. Your first useful experiment with CorteXlab. A more complex usage of the feedback tool. (to be written)
+- Tutorial 6: [[Spectrum analyser example|Spectrum analyzer example]]. Introduction of the feedback tool. (to be written, see [FFT Web](fftweb))
-- [[ FPGA PHY Zigbee | FPGA-based implementation and use of IEEE 802.15.4 PHY Layer Transmitter via Custom Bitstream (PicoSDR)]]
+- Tutorial 7: [[ Channel estimation example ]]. Your first useful experiment with CorteXlab. A more complex usage of the feedback tool. (to be written)
+- Tutorial 8: [[ FPGA PHY Zigbee | FPGA-based IEEE 802.15.4 PHY Layer Transmitter example using Custom Bitstream (PicoSDR)]]