Differences

This shows you the differences between two versions of the page.

--- tutorials [2021/09/02 14:22] – aparis
+++ tutorials [2022/02/15 14:41] – aparis
@@ Line 3: / Line 3: @@
 Here are some tutorials, in increasing order of complexity. We advise beginners to follow the tutorials in the order they're presented.
-**Important: Most (if not all) of these tutorials required a computer with our toolchain installed. Be sure to refer to the toolchain installation [[ Building a toolchain | page]] if you haven't already done so.**
+**Important : these tutorials are based upon the use of docker, be sure to have it installed on your computer. This will be the only requirement as we will provide you images with environments suitable for your local computer and the platform**
+- Tutorial 1: [[ GNU Radio Docker Benchmark example ]] This is the "Hello world" of Cortexlab using docker
+- Tutorial 2: [[ LoRa dynamic PHY layer example ]] Introduction to the LoRa project
+- Tutorial 3: [[ Bokehgui for CorteXlab ]] How to get eyes and ears inside the platform during your experiment -- [Under development]
+- Tutorial 4: [[ Cache Aided Polar Coding ]] -- [Under development]
+**You can find bellow some older tutorials based on the legacy method. Here you will not use docker but you will have to install all softwares on your local computer. You can refer to the toolchain installation [[ Building a toolchain | page]] if you want to follow those tutorials. However we recommend that you use the new and easier method based on docker.**
 - Tutorial 1: [[ GNU Radio Benchmark example ]]. This is the "hello world" of CorteXlab!
@@ Line 14: / Line 21: @@
 - Tutorial 8: [[ FPGA PHY Zigbee | FPGA-based IEEE 802.15.4 PHY Layer Transmitter example using Custom Bitstream (PicoSDR)]]
-**A new method is also available, if you don't want to install the toolchain and you're familiar (or not) with docker**
-- Tutorial 1: [[ GNU Radio Docker Benchmark example ]] This is the "Hello world" of Cortexlab using docker
-- Tutorial 2: [[ LoRa dynamic PHY layer example ]] Introduction to the LoRa project
-- Tutorial 3: [[ Cache Aided Polar Coding ]] -- Under development
 **Looking to learn GNU Radio? Follow GNU Radio's own** [[https://wiki.gnuradio.org/index.php/Tutorials|GNU Radio tutorials]]