Differences

This shows you the differences between two versions of the page.

--- doc [2024/10/14 14:06] – [Antennas] lcardoso
+++ doc [2024/11/25 11:24] (current) – cmorin
@@ Line 36: / Line 36: @@
 # USRPs
-There 26 USRPs installed in the FIT/CorteXlab room.
+There 34 USRPs installed in the FIT/CorteXlab room.
-* 22 are of type NI-2932 (equivalent USRP N210 with a SBX daughterboard). Here are the main characteristics of these (for more details refer to the [[http://www.ni.com/pdf/manuals/375988d.pdf|USRP-2932 specifications page at NI]]):
+* 28 are of type NI-2932 (equivalent USRP N210 with a SBX daughterboard). Here are the main characteristics of these (for more details refer to the [[http://www.ni.com/pdf/manuals/375988d.pdf|USRP-2932 specifications page at NI]]):
   * Frequency range: 400 MHz to 4.4 GHz
   * One Gigabit/s ethernet attachment to control node
@@ Line 44: / Line 44: @@
   * Full-duplex TX and RX chains. There are antennas connected to the ''TX/RX'' and ''RX2'' ports of all USRPs. In the case the ''TX/RX'' ports are used, then only half-duplex is supported
   * Synchronization: All USRPs are connected to a stack of octoclocks (see below for more info) and can be configured to work in synchronized mode by selecting ''external clock source'' in the USRP sink or source configuration.
-* 4 are of type N2944R (equivalent of X310).  Here are the main characteristics of these (for more details refer to the [[https://www.ni.com/pdf/manuals/375724c.pdf|USRP-2944 specifications page at NI]]):
+* 6 are of type N2944R (equivalent of X310).  Here are the main characteristics of these (for more details refer to the [[https://www.ni.com/pdf/manuals/375724c.pdf|USRP-2944 specifications page at NI]]):
   * Frequency range: 10 MHz to 6 GHz
   * Dual 10 Gigabit/s ethernet attachment to control node