User Tools

Site Tools


tutorials

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
tutorials [2017/12/05 11:18]
ooubejja old revision restored (2017/11/30 11:49)
tutorials [2017/12/08 12:12] (current)
lcardoso
Line 1: Line 1:
 +====== CorteXlab Tutorials ======
  
 +Here are some tutorials, in increasing order of complexity. We advise beginners to follow the tutorials in the order they'​re presented.
 +
 +**Important:​ Most (if not all) of these tutorials required a computer with our toolchain installed. Be sure to refer to the toolchain installation [[ Building a toolchain | page]] if you haven'​t already done so.**
 +
 +- Tutorial 1: [[ GNU Radio Benchmark example ]]. This is the "hello world" of CorteXlab!
 +- Tutorial 2: [[ Sharing the testbed with other users ]]. How to allow other users to share the testbed with you (UNDER DEVELOPMENT)
 +- Tutorial 3: [[from_gnuradio_to_cortxlab|From A to Z: GNU Radio with CorteXlab using USRPs]]. Starting from a clean sheet to a running experiment in CorteXlab using USRPs.
 +- Tutorial 4: [[from_gnuradio_to_cortxlab_pico|From A to Z: GNU Radio with CorteXlab using PicoSDRs]]. Starting from a clean sheet to a running experiment in CorteXlab using PicoSDRs.
 +- Tutorial 5: [[tuto_fpga_pico|Custom bitstream with PicoSDR]]. Let's see how to use a custom bitstream on a PicoSDR.
 +- Tutorial 6: [[Spectrum analyser example|Spectrum analyzer example]]. Introduction of the feedback tool. (to be written, see [FFT Web](fftweb))
 +- Tutorial 7: [[ Channel estimation example ]]. Your first useful experiment with CorteXlab. A more complex usage of the feedback tool. (to be written)
 +- Tutorial 8: [[ FPGA PHY Zigbee | FPGA-based IEEE 802.15.4 PHY Layer Transmitter example using Custom Bitstream (PicoSDR)]]
tutorials.1512469095.txt.gz ยท Last modified: 2017/12/05 11:18 by ooubejja